Tel : +8618150976625
Email : Hello@MicrofiberLeather.com
Velvet-touch jewellery box insert sheet: soft brushed microfibre suede in deep green, burgundy, olive, grey and more. 0.4-0.6 mm, 1370 mm wide. Sample on request.
Material :
Microfiber Suede, velvet-touch brushed napKomposition :
55% Nylon + 45% Polyurethane (PU)Dicke :
0.4 / 0.5 / 0.6 mmBreite :
1370 mm (54 inch)Farbe :
Deep green, burgundy, olive, grey, champagne & more; custom colours availableVorlaufzeit :
Confirm against order and specificationProduktionskapazität :
About 1,000,000 metres per month (multi-product line)A velvet-touch lining is chosen for how it treats the pieces inside a box: soft against metal, quiet under display light, and clean after repeated opening. This page is for the buyer choosing that lining — the microfibre suede sheet we supply, the grades it comes in, and the details that decide whether it holds up in your boxes.
This is a velvet-touch microfibre suede sheet: soft, low-sheen face with a fine suede nap, nonwoven back. Supplied 0.4 / 0.5 / 0.6 mm thick, 1370 mm wide, in a broad colour range. It is the material box makers die-cut into linings and inserts — a microfibre suede, not a real-leather or a loose-flock velvet. Send your colour and tray size for a sample.
|
0.4 / 0.5 / 0.6 mmsheet thickness
|
1370 mmroll width
|
55 / 45nylon / PU
|
Multicolour options
|
The velvet effect in a jewellery box comes from three things working together: a soft surface that will not scratch metal, a matte finish that does not compete with the piece, and a nap fine enough to look even across the lid, base and wrap panels. This sheet is built for that — a 55% nylon / 45% PU microfibre with a brushed suede face on a textile backing.
It is a microfibre suede, so the nap is dense and even rather than a loose pile, and it cuts cleanly without shedding at the edge. Approve a physical swatch: the hand and the shade are what you are buying, and a sample on your actual box is the reliable way to judge them.
|
Property
|
This suede sheet
|
Spray-flock lining
|
|
Surface
|
Dense, even brushed nap
|
Loose fibres on an adhesive layer
|
|
Die-cut edge
|
Clean, does not fray
|
Can shed at the cut
|
|
Care
|
Wipeable
|
Loft flattens with handling
|
|
Backing
|
Textile back, laminates to board
|
Coated substrate
|
The range runs from deep green, burgundy and olive to grey, champagne and warm neutrals — enough to match a case rather than force the case to match the material. Because each shade is run as its own batch, lid, base and wrap panels for one box should be cut from the same roll. We match production back to the approved swatch, so the colour you sign off is the colour that ships.
It is the lining material, not the finished insert or the box. Box and display makers die-cut it into tray liners, ring pads and drawer inserts, then laminate the textile back to board, MDF or EVA foam. Give us the colour and the intended use; give the die house the compartment layout. We supply a consistent grade — the fit remains a drawing decision.
Grammage and mechanical test figures are not listed here because we hold no measured data for this grade. Where a specification matters to your approval, ask for the physical sample and the available test evidence rather than an assumed number.
WINIW has made synthetic leather for over 25 years, running multiple plants in Jinjiang with a combined output of around one million metres a month. Material-level REACH SVHC screening is available on request. We supply the sheet; a physical swatch is the fastest way to confirm the hand, nap and shade before you commit to a run.
It is a synthetic microfibre suede — a 55% nylon / 45% PU base with a brushed suede face. It gives the soft, low-sheen hand of a velvet lining, but it is not real leather and not a loose-flock velvet.
The soft, non-glare surface is chosen for jewellery presentation because it does not scratch pieces and keeps a quiet backdrop. Approve a swatch for your specific metals and finishes; we do not claim an anti-tarnish effect.
This sheet is not a tarnish-treatment material. It is chosen for presentation and protection against scratches; if anti-tarnish is a requirement, that has to come from a separate treatment or packaging component.
We supply 0.4, 0.5 and 0.6 mm. The right grade depends on how sharply the lid and base panels turn and how much cushion the pieces need; approve a sample on your actual box before the full run.
Yes. Tell us the colour and the intended lining use and we will return a material swatch for approval, so the hand, nap and shade are signed off first.
Tell us the shade and the lining use. We will reply with the grade and a physical swatch, freight collect.
Request a SampleHEISSE TAGS :